Electrical Wiring Inspection in Spring Hill, FL
Licensed, Local, and Trusted Since 1973 (#EC13006813)
Wiring Inspections
An electrical wiring inspection from Faulkner Electric gives you a complete, honest picture of your home's electrical system — what's safe, what's outdated, and what needs attention before it becomes a hazard, a code violation, or a problem your insurance carrier flags. We've been inspecting homes across West Central Florida for over 50 years, and every inspection is performed by a Florida State Certified Electrical Contractor, not a general home inspector.
Whether you're buying a home, refinancing, renewing your homeowner's insurance, or simply haven't had your wiring looked at in years, a professional inspection is the only way to know what's actually inside your walls.
The Electrical Problem Most Florida Homeowners Don't Know They Have
The housing market in West Central Florida tells a specific story. Homes built across Hernando, Pasco, and Citrus counties in the 1960s, 1970s, and 1980s were wired with materials and panel brands that are now considered fire hazards — and most of those homes have never been inspected by a licensed electrician since the day they were built.
Aluminum wiring, Federal Pacific panels, Zinsco breakers, undersized service entrances, and absent GFCI protection were all standard practice when these homes were constructed. They pass a visual check by a home inspector. They do not pass a licensed electrical inspection.
Florida's climate accelerates the problem. Heat cycling expands and contracts connections. Humidity corrodes terminations. Hurricane season puts abnormal stress on service entrances and outdoor circuits. An electrical system that was adequate in 1978 may be a liability in 2026.
A wiring inspection finds these problems before they find you.
When Do You Need an Electrical Wiring Inspection?
Buying or Selling a Home
Home inspectors provide a general overview of a property — but they are not licensed electricians and are not equipped to identify every wiring defect. A dedicated electrical inspection before closing gives buyers a clear report on panel age and condition, wiring type, GFCI and AFCI protection gaps, and grounding issues. Sellers use the same inspection to surface and address problems before they become price negotiation leverage for the buyer.
Your Home Is 25 Years or Older
Home inspectors provide a general overview of a property — but they are not licensed electricians and are not equipped to identify every wiring defect. A dedicated electrical inspection before closing gives buyers a clear report on panel age and condition, wiring type, GFCI and AFCI protection gaps, and grounding issues. Sellers use the same inspection to surface and address problems before they become price negotiation leverage for the buyer.
You Have Aluminum Wiring
Aluminum wiring was used in Florida homes built between 1965 and 1973 as a copper substitute. It expands and contracts more than copper, which gradually loosens connections at outlets, switches, and breakers—and loose connections generate heat. Aluminum-wired homes in Spring Hill, Port Richey, Hudson, and New Port Richey are common. An inspection identifies which circuits are aluminum and what remediation—CO/ALR-rated devices or a full rewire—is appropriate for your home.
Before or After a Major Renovation
Adding a kitchen, finishing a garage, or adding a room changes your home's electrical load. An inspection before renovation confirms your panel and service entrance can handle the new demand. After renovation, an inspection confirms the work was done to Florida Building Code before the walls close up.
Your Insurance Carrier Requires It
Many Florida homeowners insurance carriers now require a 4-point inspection — covering the roof, HVAC, plumbing, and electrical — for homes over 30 years old before issuing or renewing a policy. Our licensed inspection satisfies the electrical portion of that requirement and provides documentation your insurer will accept.
You're Noticing Warning Signs
Flickering lights, breakers that trip repeatedly, outlets that feel warm, burning smells, or discolored switch plates are all symptoms of underlying wiring problems. None of these are normal. An inspection finds the source before it becomes a fire or shock hazard.
What Our Electrical Wiring Inspection Covers
Our inspections are performed by Florida-licensed electricians — not generalists. We work through your entire electrical system from the service entrance at the meter to the last outlet on every circuit.
Electrical Panel and Service Entrance
- Panel brand, age, and amperage capacity
- Individual breaker condition, labeling, and proper sizing
- Double-tapping, overfusing, and overloaded circuits
- Main disconnect function and condition
- Grounding electrode system and bonding
- Service entrance cable condition and weatherhead integrity
Electrical Panel and Service Entrance
- Panel brand, age, and amperage capacity
- Individual breaker condition, labeling, and proper sizing
- Double-tapping, overfusing, and overloaded circuits
- Main disconnect function and condition
- Grounding electrode system and bonding
- Service entrance cable condition and weatherhead integrity
Wiring Throughout the Home
- Wire gauge vs. breaker sizing on all accessible circuits
- Aluminum wiring identification by circuit
- Knob-and-tube wiring detection in attic and crawlspace
- Junction box accessibility and cover installation
- Visible wiring in garage, attic, and utility spaces
Outlets, Switches, and Fixtures
- GFCI protection in all required locations: kitchens, bathrooms, garages, outdoors, and near any water source (NEC requirement)
- AFCI protection on bedroom and living area circuits where required by Florida Building Code
- Grounded vs. ungrounded outlets throughout the home
- Polarity testing and proper wiring at every outlet checked
Code Compliance and Safety Devices
- Smoke detector placement and type against current Florida code
- Surge protection presence at the panel
- Code compliance relative to the year the home was built and any permitted updates since
What to Expect: The Inspection Process
Most residential electrical inspections take 1.5 to 3 hours, depending on home size, age, and complexity. Here's what happens during that time:
Service entrance and panel review — We start at the meter and work through every breaker and terminal inside the panel.
Room-by-room walkthrough — Every outlet, switch, fixture, and visible wiring run is tested and checked.
In the attic, crawlspace, and garage, we check wiring where it's most likely to be compromised and least likely to have been touched since installation.
Written findings report — Every finding is documented and categorized by severity: immediate safety hazard, code violation, or maintenance recommendation.
Walk-through with the homeowner—Before we leave, we explain every finding, what it means, and what the options are. You won't get a list of problems and a bill with no explanation.
Why West Central Florida Chooses Faulkner Electric
- Florida State Licensed: Certified Electrical Contractor #EC13006813—every inspection is performed by a licensed electrician, not a generalist
- 50+ years of local experience: Three generations of Faulkners have inspected and wired homes across this region since 1973
- No alarm-selling: We report what we find, prioritize it honestly, and explain your options—we don't manufacture urgency around findings that don't warrant it
- Written report: Every inspection includes a documented findings report you can share with your realtor, insurer, or any contractor doing follow-up work
- Inspection credit: The inspection fee applies toward any repair or upgrade work you book with us
Serving Electrical Inspection Customers Throughout West Central Florida
Faulkner Electric performs electrical wiring inspections across 22+ communities in West Central Florida:
Spring Hill · Brooksville · Hudson · New Port Richey · Trinity · Land O Lakes · Wesley Chapel · Tarpon Springs · Palm Harbor · Lutz · Dade City · Zephyrhills · Holiday · Homosassa · Crystal River · Inverness · Hernando · Odessa · New Tampa · Dunedin · Safety Harbor · Clearwater
Not sure if we cover your area? Call us at
(727) 301-7996 and we'll confirm.
Frequently Asked Questions (FAQ)
How long does an electrical wiring inspection take?
Most residential inspections take 1.5 to 3 hours. Larger homes, homes with multiple panels, or homes with suspected aluminum wiring or older panel brands typically take closer to 3 hours. We'll give you an estimated window before we arrive.
Do I need a permit for an electrical inspection?
No. A safety inspection by a licensed electrician does not require a permit. Permits are only required when electrical work is performed-installations, replacements, or modifications to existing systems. If our inspection leads to panel replacement, rewiring, or other work, we pull all required permits as part of that job.
Can a home inspector do the same inspection as a licensed electrician?
No. Home inspectors are licensed for general property assessment and are not qualified to test panel internals, diagnose circuit-level conditions, or evaluate code compliance. When a home inspector notes an electrical concern, the required follow-up is a licensed electrician — we perform that assessment directly and skip the referral step.
What is aluminum wiring and why does it matter?
Aluminum wiring was used in Florida homes from roughly 1965 to 1973. It's not immediately dangerous, but it expands and contracts more than copper with changes in temperature, which gradually loosens connections at outlets, switches, and breaker terminals. Loose connections generate heat, and heat is the primary cause of electrical fires in aluminum-wired homes. An inspection identifies exactly which circuits are aluminum and what the appropriate remediation is for your specific home.
Will your inspection satisfy my insurance company's 4-point requirement?
Yes. Faulkner Electric is a Florida State Certified Electrical Contractor. Our inspection documentation is accepted by Florida homeowners insurance carriers for the electrical portion of a 4-point inspection. We can provide findings in whatever format your carrier requires.
What happens if you find problems during the inspection?
You receive a written report with every finding, clearly categorized: immediate safety hazard, code violation, or maintenance item. We walk through every finding with you before we leave and explain what it means and what your options are. There's no obligation to hire us for repairs — though the inspection fee is credited toward any repair or upgrade work you book with us.
How often should a home's electrical wiring be inspected?
Every 10 years is a reasonable baseline for most homes. Schedule one sooner if you're buying or selling, before or after a major renovation, after hurricane or flooding damage, if your home is over 40 years old and has never been inspected, or any time you notice electrical symptoms — tripping breakers, flickering lights, warm outlets, or burning smells.
